This useful gadget is not only an accurate speedo, it doubles as a clock and has multiple functions such as a trip meter, distance, stopwatch, average speed read out and maximum speed recall in mph or kph. It reads top speed of up to 183 mph (300 kph) and is accurate to 1/100th of a mile. Simply mount the unit onto the handlebar, key in the front wheel circumference in millimetres and off you go.
The MC8 features
. Robust construction
. Easy to use
. Rim or Spoke magnet
. Extra thick cable
. Displays MPH or KPH
Dimensions of speedo head unit (looking at the display):
Width 41mm x height 45mm x depth 17mm
Click here for instructions
Part No. W18-MC8
View
|
 |
Speedometer/housing/lighting/all signals - SW-MOTECH speedometer housing set.
CNC-milled aluminum housing with Sigma MC8 speedometer, display light and indicator lights for high beam, temperature, flasher and idle. Made for direct mounting on 22mm handlebar tube. Power supply of Sigma Speedometer 12V. Power supply of display light and indicator lights, 12 V.
* Included:
o Sigma MC8 speedometer
o Aluminum housing
o Display light
o High beam indicator light
o Flasher indicator light
o Temperature indicator light
o Idle indicator light
o Mounting material
Part Number: BTG.00.375.100
|
|
Enduro/Trailbike/Greenlane Tooltube with OR without drillable top lug.
These tubes are the best option for carrying tools off-road.
They are long enough to carry 240mm (9") tyre levers plus all your trail tools (spanners etc.) and unlike tool bags these are 100% waterproof due to the seal incorporated in the cap.
There’s no zip to break or come undone so you won’t lose your tools and they won’t rust in the wet.
Ideal to mount under rear fender opposite exhaust as shown.
Robust design that won’t shatter or crack made of impact resistant poly-plastic with stainless steel fittings and supplied with 4 s/s washers, 2 s/s 6mm cap screws, 2 s/s 6mm nuts.
Optional drillable lug to mount or clamp where you want.
A bracket could be made by buyer to mount to sub-frame etc. Overall length 300mm approx by 90mm OD, and lug size 100mm by 40mm. Sprung fastened end cap with seal - can be made totally secure with R-clips or split pins, etc.
Tested extensively off road and on the trail - these are VERY, VERY tough indeed!!
View detailed image
|
|
High quality Ardi-Star LED brake and tail light.
Will fit any off-road or trail bike, etc. with a 12V feed.
Width of light is 83mm.
Sturdy construction - will support a number plate as well if required.
Powerful and very robust LED light is ideal for off-road machines - no more blown stop and tail bulbs!
Easy to fit, however, some modification may be required to fit certain bikes (i.e. trimming or drilling of the plastic).
Lens is "E" marked and is fully road legal.
Features illumination for your number plate (if fitted) and will pass an MOT.
|
|
High quality Ardi-Star LED number plate light.
Will fit any bike, etc. with a 12V feed.
Width of light is 55mm. Mounting hole centres are 45mm apart. Length 25mm, depth 19mm
Approx. 100mm of wiring provided.
Powerful and very robust 4 x LED lighting is ideal for off-road machines - no more blown filament light bulbs!
Easy to fit, however, some modification may be required to fit certain bikes (i.e. trimming or drilling of the plastic).
Lens is "E" marked and is fully road legal.
12V, 0.3W.
|
|
Warm, thick and soft to keep you insulated and comfortable. Quality ribbed-effect material designed to last.
|
|
Top quality black cotton balaclava, featuring single face opening for eyes and nose and a good neck length to keep out those draughts. Very comfortable and essential for cold weather riding.
|
|
Deluxe chrome tax disc holder with screw on front. Simple, classic design.
View
|
|
We searched all over to find the very best quality tax disc holder on the market and here it is!
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre.
Supplied with Allen key and mini-spanner. Made in England.
|
|
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre with a silver anodized aluminium bezel.
Supplied with Allen key and mini-spanner. Made in England.
|
|
Totally waterproof, this secure tax disc holder is fitted with an O-ring to ensure a watertight seal. For a 100% secure seal smear the O-ring with a little Vaseline or silicone grease. Beautifully made from Twill Weave carbon fibre in a Silver Shadow style.
Supplied with Allen key and mini-spanner. Made in England.
|
|
 These are a great, must have accessory. Two stage heated grips keep you comfortable and warm. Riding with these really do extend your riding season!
Superb quality US-made grip heater kit. Fed up with harsh, hard rubber heated grips from other manufacturers? Then we have the answer. This quality kit allows the heating elements to be fttted neatly and discretely under the original manufacturer grips or your own favourites.
Easy to install, with two stage heat settings, the kit is suitable for all types of bike, tourers, sports, nakeds and off-road / enduro bikes. Their wraparound nature means they will fit any size handlebars.
The kit consists of two heating elements on flexible mylar tape that attaches to your handlebar (clutch side) and throttle tube (throttle side) via permanent adhesive on the back. The right and left heaters are different, to accommodate lower heat tolerance of plastic throttle tubes. They draw 3 amps (36W) on the high position. No external resistor or other parts are needed to install. Available with either a 3-position (off, high, low) metal toggle switch or surface-mount round rocker switch
These grip heaters provide you with an effective and convenient way to keep your hands and fingers warm, without having to use bulky and awkward winter gloves. If you've never used heated grips before, you'll be amazed how much you do use them, once fitted and how you ever managed before!!
These grip heaters have been raved about on bike forums all over the net and are now available in the UK.
Please specify type of switch required - metal toggle (recommended for off road, ease of use with gloves) or round rocker (recommended for neat dash fit on sports bikes and tourers).
View
|
|
 *** Perfect for BMW riders or any bike with an auxilliary power socket ***
Great new German designed and manufactured product. So simple it's brilliant!
Turns almost any jacket into a heated one. Heated pad slips in the same pocket along with your back protector with simple 12v plug. Great in winter, great on cool summer evenings with your lightweight sports jacket. Easily switches from jacket to jacket.
Only 1mm thick, so easy to install.
12V / 35W maximum draw - less than 4A.
Heats quickly to 37 degrees, with automatic temperature regulation to prevent overheating.
Combi fused plug, fits both standard cigarette lighter and DIN / Hella / BMW type sockets (not supplied, but easily fitted, see Yamaha photo).
Light, unobtrusive, no bulky liners - a real boost on cool summer evenings and cold winter days. No complicated wiring, easy to fit, easy to use, easy to swap from jacket to jacket.
Note - this does not replace the back protector, it slides in as well as the protector.
NORMAL PRICE £45.00 (Heatpro)
View more images
|
|
High quality, stick on digital clock with large, easy to read digits. Two mounting brackets provided: one self-adhesive and one that can clip on to a vent, etc. Either way, you can remove the clock when you need to wash the bike.
This clock isn't waterproof, but we've found that if it's mounted behind a screen so that it's protected from the worst of the elements, and it's removed if the bike is left out in the rain, then it should be fine.
|
|
The Acumen DG8 is supplied as a plug-in head unit with a plug-in extension lead (over 1.5 metres total length) for a universal fit.
Easily installed using basic tools and a soldering iron. Full installation and set-up guide included.
Suitable for bikes fitted with electronic speedo and tacho.
Part No. W45-DG8-BLUE
|
|
The DG8 is designed for bikes with digital speedometers but purchasing this Speedo Cable Upgrade Kit will provide the output you need even when your bike is fitted with a cable speedometer. Simple to fit, comes with instructions and fittings.
Part No. W45-CONVERTER
|
|
